68
Section 3 - Operation
3.4 Water Blasting System
Startup Procedure
The startup procedure outlined in this section is
general and will apply to most trucks. However,
your truck may be slightly different, depending
on the options selected. Always refer to the
placard on the back of the visor in the cab for
specific startup and shutdown instructions
for your truck.
Starting The Truck And Activating Accessory
Hydraulics:
Make sure to complete the Pre-Op checklist prior
to initiating this procedure.
1. Make sure the main breakers are on and all
switches and speed dials are in the OFF posi-
tion or set at 0.
2. Be sure the truck transmission is in neutral
with the truck engine running at idle speed
and the park brake set.
Typical STARTUP/SHUTDOWN Procedure Placard On Visor
Control Panel & Joystick
WARNING
NEVER ACTIVATE PTO WHEN
TRANSMISSION IS ENGAGED
SK5000
REV 1.0
EMERGENCY SHUTDOWN
SHUT OFF JOHN DEERE KEY
HIT E-STOP
SHUTDOWN PROCEDURE
1. DUMP VALVE SWITCH “OFF”
2. LOWER ENGINE SPEED ON SKID ENGINE
3. DISENGAGE CLUTCH ON ENGINE
4. ACTIVATE PARK BRAKE
5. TURN OFF PTO ROCKER SWITCH
GREEN LED LIGHTS FOR SPLIT DRIVE
PTO WILL ACTIVATE
6. ALL SWITCHES TO OFF OR SET TO “0”
START-UP PROCEDURE
1. ALL SWITCHES TO OFF OR SET TO “0”
2. PARK BRAKE SET
3. TRANSMISSION IN NEUTRAL
4. START TRUCK ENGINE
5. TURN ON PTO ROCKER SWITCH
RED LED LIGHTS FOR SPLIT DRIVE & PTO WILL ACTIVATE
6. START SKID ENGINE
7. TURN OFF PARK BRAKE
8. CHARGE PUMP ON (CHECK FOR 60PSI)
9. IMPLEMENT MODES AVAILABLE
10. ENGAGE CLUTCH ON SKID ENGINE
11. ADJUST ENGINE SPEED ON SKID ENGINE
12. DUMP VALVE SWITCH 40K
OPERATE ARM
DUMP TANK
MOVE TRUCK HYDRAULICALLY
HEAD ROTATION
Summary of Contents for SK5500
