31
31
Section 2 - Stripe Hog Systems
2.5 Hog Arm and Hog Heads
Overview
The Hog Arm assembly is mounted to the front
of the chassis, just forward of the bumper. All
functions of the Hog Head and arm are controlled
by the joystick and switches in the control panel.
The hydraulic system provides the power for all
functions of the Hog Arm and the power to drive
the hydraulic motor that rotates the spray bar.
The hydraulic system is powered by the auxiliary
engine. It is activated whenever the engine is
running. (Refer to the Startup procedure in the
Waterblasting Operation section of this manual).
Hog Arm
The SK5500 is equipped with 3-Axis Hog Arm.
The control panel and joystick in the cab control
all hydraulic functions of the Hog Arm. The Hog
Head can be moved up and down, right and left or
can be set to float, which allows the Hog Head to
freely move up and down with the contour of un-
even surfaces. The arm mounting system allows
the arm to mounted on either side of the truck.
Joystick & Control Panel
Hog Head, Hog Arm & T-Handle Pin
When the Hog Arm is raised to the full up position for
transport, it must be secured with the quick release,
T-handle pins. The pins are a safety feature that
prevents the Hog Arm from being lowered acciden-
tally while the vehicle is operating in Drive Mode.
The operator must remove the pins before it can
be lowered. Make sure the truck is stopped with
the parking brake set before removing the quick
release pins.
Summary of Contents for SK5500
