Hog Technologies SK5500, Operation Manual

Page: 64 / 161

64 64
Section 2 - Stripe Hog Systems
2.17 Access Panels,
Ladders & Tool Boxes
Ladders
Ladders on the left side of the unit provide access
to the water blasting components located on the
skid between the water tanks and the truck cab.
Each ladder is hinged and has a spring loaded
safety pin that locks the ladder in the stored or
deployed position. To use the ladder, release the
safety pin and swing the ladder out until the pin
locks in the deployed position. Return the ladder
to the stored position and secure it with the safety
pin when service or inspections are complete.
Debris Tank Ladder
Another ladder on the right side of the debris tank
provides access to the top of the tanks. The ladder
is hinged and has a spring loaded safety pin that
locks the ladder in the stored position. To use a
ladder, release the safety pin and rotate the lad-
der to the down position. Return the ladder to the
stored position and secure it with the safety pin
when service or inspections are complete.
CAUTION
ALWAYS MAKE SURE LADDERS AND TOOL BOX DOORS ARE
LATCHED IN THE CLOSED OR STORED POSITION BEFORE
OPERATING THE TRUCK. THE LADDER AND TOOL BOX
DOORS STICK OUT FROM THE SIDE OF THE VEHICLE AND
CAN CAUSE DAMAGE TO THE TRUCK OR OTHER VEHICLES
IF THEY ARE NOT PROPERLY SECURED FOR TRANSPORT.
Tool Boxes
Heavy duty, lockable tool boxes are located on
each side of the truck chassis. Tool boxes are used
for storing hoses, fittings, extra parts and tools.
Always make sure the tool box doors are closed,
latched and locked before operating the truck.
Typical Debris Tank Ladder
Side Ladders & Tool Boxes
Ladder Safety Pin