60
60
Section 2 - Stripe Hog Systems
Hydraulic Manifold
The Hydraulic manifold is mounted to the front
of the skid. Electric solenoid valves activated
by switches in the control panel direct hydraulic
pressure to the various components in the water
blasting hydraulic system. The solenoid valves are
a cartridge type design that are easily replaced in
the event of a failure.
There are three pressure gauges on or near the
manifold. The gauge on the lower right side of the
manifold displays the operating pressure of the ac-
cessory hydraulic system. The gauge mounted to
the left of the manifold displays hydraulic pressure
to the UHP pump dump valve. The gauge above
the dump valve gauge displays air pressure to
the pneumatic valves that engage the PTO clutch.
Refer to the Pneumatic System for information on
clutch engagement sequence and pressure.
Hydraulic Manifold & Solenoid Valves & Dump Valve Gauge
3
2
Air Pressure & Dump Valve Pressure Gauges
Accessory Hydraulic System Pressure Gauge
1.
Accessory Hydraulic System Pressure Gauge
2.
Dump Valve Hydraulic Pressure Gauge
3.
Pneumatic System Air Pressure Gauge
2
1
Summary of Contents for SK5500
