28
Operation manual geodyna 2350 - 9413 126
Balancing the wheel
1
1
2
2
50
51
52
53
25
3
ALU
ALU
START
inch
mm
1
2
8.
Balancing the wheel
Preparations:
-
Compensation run carried out, if necessary (see § 6.2).
-
Wheel correctly clamped (see § 6.3).
-
Balancing mode chosen (see § 7.1).
-
Distance and rim dimensions entered (see § 7.2).
If several wheels of identical nominal rim dimensions are bal-
anced in succession, it is only necessary to enter the data for
the first wheel. The inputs will remain stored until new data is
entered.
8.1
Measurement
D
Start the measuring run (by pressing the START key or
closing the guard, depending on adjustment).
D
Index the wheel into correction position following the
direction indicated (
Fig. 52
,
item 1)
.
On reaching the respective correction position only the center
element of the direction indicator is lit (
Fig. 53
,
item 1)
.
D
In this position attach a balance weight in the correction
position at the top of the rim, at 12:00 o’clock (
Fig. 53,
item 3
).
For correct fitting of the balance weights see Fig. 54, 56
and 59.
Fig. 53
Example of display and correction of the righthand
correction plane
1
Display of correction position -
only the center element lights up
2
Display of amount of unbalance
3
Position of balance weight on rim
