20
Operation manual geodyna 2350 - 9413 126
Entry of balancing mode and wheel size
39
40
41
.
+
-
1
ALU
+
-
ALU
.
.
1
7.2
Input of wheel dimensions for the standard
balancing mode
If several wheels with identical wheel size are balanced in suc-
cession, it is only necessary to enter the data for the first wheel.
It will remain stored until new entries are made.
7.2.1 Determination and input of rim width
Use the rim width callipers
(Fig. 40)
.
Fig. 39
Input of rim width
D
To enter the rim width, press and hold the relative func-
tion key
(Fig. 39, item 1)
.
D
Rotate the wheel while the key is pressed in order to set
the value for the rim width on the display, and then re-
lease the key.
7.2.2 Determination and input of wheel diameter
D
Note the wheel diameter on the rim or tire.
D
To enter the wheel diameter, press and hold the function
key
(Fig. 41, item 1)
.
D
Rotate the wheel while the key is pressed in order to
enter the diameter.
Having made the input release the function key.
