
42
Chapter 4: Commissioning
SETTING UP THE DEVICE
Place the device on a flat and stable surface. Make sure that the device is placed
securely and that the air inlet at the rear of the device is not blocked. Make sure
that the display and the LEDs are positioned in the user's field of vision during
ventilation. The device is designed for operation within arm's reach.
> 10 cm
Figure 8:
Setting up the device
POWER SUPPLY
The ventilator may be supplied by three different power sources.
• Mains connection via switched-mode power supply unit
• Internal battery
• External battery pack (optional accessory)
The ventilator automatically detects which power sources are available. If the
device is connected to an external power source (power supply or external bat-
tery pack), it will always use this source first and then switch to the internal battery
as needed. In each case, the used power source being drawn on will be indicated
by the power LED or battery LED.
MAINS OPERATION
1. Insert the power supply plug into the DC connector socket.
Do not pull on the cable to disconnect the power supply plug from the DC
socket. The snap-lock ODU plug can easily be disconnected by pulling
back on the outer sleeve of the connector housing.
Summary of Contents for CARAT II pro
