Hobby Vantana 2018, Manual

Page: 161 / 207

10. Built-in devices 160
Use the adjusting knob / pushbutton to select the icon in the
menu line
m
.
- Press to switch to the setting mode.
Setting the timer
- Use the adjusting knob / pushbut -
ton to set the hours and then the
minutes.
Entering the start time
- Use the adjusting knob / pushbut -
ton to set the hours and then the
minutes.
Entering the end time
The timer can only be selected if the clock on the control panel
has been set.
If the timer has been activated (ON), the menu item Activate timer
(OFF) is first displayed.
As soon as the heating has been switched on (room tempera-
ture and hot water temperature have been activated) the fan
speed selected in the previous heating operation is displayed
in the status line. Manufacturer's default setting: “ECO”.
1)
Can lead to higher engine wear, depending on how often it
is selected.
2)
The “HIGH” fan speed has a higher current consumption,
higher noise level and higher engine wear.
Danger of poisoning from exhaust fumes.
The activated preselection timer switches the heating on
even if the van has been parked. In closed rooms (such as
garages, workshops) the exhaust fumes from the heating
can lead to poisoning. If the recreational vehicle is parked
in a closed room:
• close the fuel supply (gas) to the heating system;
• deactivate the preselection timer on the Truma CP plus
control panel (OFF);
• switch the heating off on the Truma CP plus control panel.
d BOOST To heat room rapidly
Available if the difference between
the selected and the actual room
temperature is more than 10°C.
e NIGHT Heating runs on a partial load
only;the set room temperature
may not be reached (depending on
the size of the vehicle and the
outside temperature).