8. Water 135
Emptying the entire water system
• Use the control panel to switch off the electricity for the
water pump by pressing the main switch (for approx. 4
seconds).
• Open all of the water taps to the centre setting.
• Hang up the adjustable shower head in the shower.
If the vehicle is not being used and there is a danger of
sub-zero temperatures be sure to drain the entire water
system. Leave taps turn on in the middle position. Leave
all drain valves open.
Only empty your waste water tank at the specially desi
-
gnated disposal points and never in open spaces! As a
rule disposal points can be found at motorway service
stations; campsites and petrol stations.
Waste water opening
• To empty the fresh water tank, turn the rotating wheel
j
to
the left to open.
Emptying the waste water tank
• The waste water opening
k
is located on the left side
underneath the vehicle.
• Turn the valve
l
to open it and drain off the waste water.
• After all of the waste water has been drained off, shut the
valve by turning it.
• Open all of the outlet valves (including the FrostControl).
• Unscrew the cap on the cleaning port of the fresh water
tank
k
(page 133).
• Unscrew the overflow pipe in the fresh water tank.
• Remove the lid of the water tank. Take out the water pump
and hold it up until the water pipes have emptied com
-
pletely.
• Check whether the tank, boiler, faucets and pipes have
emptied completely. If necessary, blow out any remaining
water in the pipes using compressed air (max. 0.5 bar).
• Re-insert the the water pump in the fresh water tank and
close the openings.
• Leave the faucets and the outlet valves open.
• Clean the tanks and rinse them thoroughly.
• Allow the water system to dry for as long as possible.
• Do not forget to empty the toilet cassette.
3
2
Summary of Contents for Vantana 2018
Page 1: ...MANUAL Version 11 2017 Van Vantana GB...
Page 206: ...14 Technical Data 205 Index...