Hobby Vantana 2018, Manual

Page: 117 / 207

7. Electrical Installations 116
6
The 230V system is protected by a two-pole 13 A automatic cir -
cuit breaker
o
, which is located in the seat chest in the seating
arrangement. It can be accessed via the side compartment.
Fuse protection for the 230V system
5
Automatic circuit breaker with FI ('fast interrupt') switch
Rules for the mains connection
• Use only a 3 x 2.5 mm
2
cable with a maximum length of 25 m,
a CEE plug and connector to connect the van to an external
230 V mains.
• After the mains connection has been plugged in, both the
modular and the vehicle battery will automatically be char -
ged by the battery charger in the van (even if the Control
Panel has not been switched on).
When obtaining electricity via a cable drum, this must be
completely unwound, as otherwise induction may cause
the cable to heat up, which could lead to burning.
(Provided there is no protection against overheating)
• The 230 V mains connection in the van has been designed
for a total power consumption of 2300 W. If additional
devices requiring electricity are connected, such as a water
heater, etc., you must ensure that this electric power value
is not exceeded, taking other electrical equipment in use,
such as the refrigerator, heating, etc., into account.