7. Electrical Installations 115
Supply via mains connection
The van is connected to the external 230V mains by means
of the CEE external socket
j
located in the side wall.
To connect the CEE feeder plug
• Switch off the automatic circuit breaker
o
(see also p. 116)
by pressing the rocker button
n
(see also p.116)
down.
• Flip up the cover flap of the CEE external socket
k
(see
also p. 40).
• Completely unwind the connector cable.
• Open the cap of the CEE feeder plug
l
by pulling it up in a
90° angle
• Insert the plug
m
until it locks into place.
• Switch the automatic circuit breaker
o
back on.
Connected 230V feeder plug
4
1
2
3
The van's engine must be turned off before the 230V
mains connection is hooked up.
Only plugs and cords that comply with CEE standards
may be used.
To disconnect the electric connection:
• Switch off the automatic circuit breaker
o
by pressing the
rocker switch down
n
.
• Remove the CEE feeder plug
m
.
• Press the cover flap
k
of the external socket
(see also p.
40)
down until it clicks into place.
Summary of Contents for Vantana 2018
Page 1: ...MANUAL Version 11 2017 Van Vantana GB...
Page 206: ...14 Technical Data 205 Index...
