Hobby Vantana 2018 Manual Download Page 109

Page: 109 / 207

7. Electrical Installations

108

Battery management

The batteries available in the bus system are displayed on the

Battery Management menu. The battery menu can recognise

up to 3 batteries provided each of these has a battery sensor.

All information is transmitted via the sensors.

Values are displayed for power, voltage, mains operation and

discharging/charging of the battery.

Ill. 16

Water and waste water

The water levels in the fresh water and waste water tanks can

be seen in this submenu.

The waste water tank heating system and the boiler for the heating

system can be switched on and off here manually as required.

Ill. 17

The motor battery is also displayed. The function can be

programmed to send you a message if the battery voltage

should sink below a critical level.

Power supply

disconnected

Battery 1

Driver’s cab

Battery 2

Motor

Power supply

send message

Waste water

heating

Send water level

Boiler

Summary of Contents for Vantana 2018
















































































































































































































Search results

Summary of Contents for Vantana 2018

Reviews:

Related manuals for Vantana 2018

Brands by name

Popular brands

Hobby Vantana 2018, Manual

Search results

Summary of Contents for Vantana 2018

Reviews:

Related manuals for Vantana 2018

Brands by name

Popular brands