Hobby Vantana 2018, Manual

Page: 120 / 207

7. Electrical Installations 119
Operation via ancillary battery
• Only accumulator batteries with bound electrolytes (gel
batteries) may be installed in those positions specified
by the manufacturer.
• The installed gel battery may not be opened.
• When changing ancillary batteries, use only batteries of
the same make and capacity. (Setting the battery type
on the control panel: see p. 78 )
• Before disconnecting or connecting the auxiliary battery,
switch off the motor, 230V supply, 12V supply as well as
all electrical devices.
• Before replacing fuses you must first de-energise the
charger.
• Before replacing a blown fuse you must first fix whatever
caused the fuse to blow.
• Fuses may only be replaced by fuses with the same fuse
protection value.
• Airing the charger insufficiently will reduce the charge
current.
• The surface of the charger casing may become hot when
the device is in operation.
The 230V electrical devices do not work when using the
ancillary battery as a power source!
Position of the 95 Ah AGM ancillary battery
The ancillary battery is mounted in the front right passenger
seat console. The foot of the battery is attached to a base plate.
The seat, including the rotating assembly, must be dismantled
in order to subsequently fit or change the batteries.
Vehicle's electric system underneath the passenger seat
In all vehicles, the optional additional battery is mounted
on a base plate in the front left passenger seat console.