Hobby Vantana 2018 Manual Download Page 18

Page: 18 / 207

2. Safety 17

Switching electric consumption

The following applies when switching electric consumption

• Open the main stop valve on the accelerator cylinder and

the accelerator stop valve on the consumer required.

• If necessary, switch the refrigerator from 12V to gas or

230V because the 12V supply will automatically be swit

ched off after a brief period of time when the van's engine
is not running (applies only for absorber refrigerator*).

Water installation

Water left standing in the fresh water tank or the pipes quickly

becomes undrinkable.

Therefore, check the water pipes and the fresh water tank be-

fore each drive to ensure they are clean. Disinfect and rinse

the drinking water facility regularly, and always before each

journey.

Please empty any residual water from the water tank

before filling it with fresh water.

Summary of Contents for Vantana 2018
















































































































































































































Search results

Summary of Contents for Vantana 2018

Reviews:

Related manuals for Vantana 2018

Brands by name

Popular brands

Hobby Vantana 2018, Manual

Search results

Summary of Contents for Vantana 2018

Reviews:

Related manuals for Vantana 2018

Brands by name

Popular brands