10. Built-in devices
156
To operate
Start / stand-by screen
A few seconds after the control
panel has been connected to the
power supply, a start screen will
appear.
If nothing is entered for several
minutes, a stand-by screen will
automatically be displayed.
When the time is set (see “Setting the time”) the display
alternates between the time and the room temperature
that has been set. If no time has been set, the set room
temperature will be displayed permanently.
Functions
The functions in the menu lines
lm
of the control panel
can be selected in any sequence. The operating parameters are
shown in the status line
k
or in the display
no
.
Press the adjusting knob / push-
button
The display shows the setting mode.
The first icon blinks.
Selecting the setting mode
To switch on/off
To switch on
- Press the adjusting knob / pushbutton.
To switch off
- Press the adjusting knob / pushbutton for longer than 4 seconds.
-
iNet-ready
: After 2 seconds, “APP” appears on the display;
after a further 2 seconds, “OFF” appears on the display.
Previously set values / operating parameters will be reacti
-
vated after the control panel has been switched on.
Due to an internal lag feed in the heating or air-conditioning
system, it may take a few minutes for the Truma CP plus
control panel to switch off.
Summary of Contents for Vantana 2018
Page 1: ...MANUAL Version 11 2017 Van Vantana GB...
Page 206: ...14 Technical Data 205 Index...
