Hobby Vantana 2018, Manual

Page: 95 / 207

7. Electrical Installations 94
Error
code
Error name Causes To eliminate
01
No connection to
turnable satellite
dish
Defect coaxial cable or plug
connection
No power supply for turnable
satellite dish
Coaxial connections for input and
output
A dealer can replace the cable or plug.
Check whether the battery circuit breaker has been switched on, the
battery is discharged or the 230V mains voltage is connected.
The red master cable must be plugged into the “Input” socket.
02 Satellite not
found
No unobstructed view to the
satellite
The mobile home is located out -
side the satellite’s footprint
Heavy clouds
If possible, change the location or remove whatever obstructs the
view. Change the search level.
Select another satellite, e.g. “Hotbird” instead of “Astra” in northern
and eastern Europe.
During severe thunderstorms and periods of very dense clouds, the
satellite cannot screen through the cloud cover.
03 Ignition signal
supplied
The ignition signal ensures that
the turnable satellite dish is
retracted
Switch the ignition off.
04 Mechanical stop The dish has hit an obstruction or
is frozen.
Not enough power to operate the
servomotors.
Antenna has lost its position.
Remove the obstruction; remove snow and ice from the dish; restart the
system.
Switch off other electrical devices. Charge the battery.
Please have the satellite dish checked by a Hobby dealer and let them
install any updates.
Error codes