10. Built-in devices
174
Operation
• Use the main switch on the Control Panel to turn on the
12V power supply.
• Lift up the glass cover
j
(page 173)
.
• Turn the adjusting knob
k
of the burner you wish to use
to the ignition position (large flame), press it and hold it
pressed.
• Use the igniter
l
to ignite the flame.
• Continue to press the rotary switch
k
for a further 5-10
seconds to ensure that the automatic flame guard takes
effect.
Operating elements for gas cooker
2
3
2
• Release the rotary switch
k
and turn to the desired set-
ting (large or small flame).
• If ignition was unsuccessful, repeat the procedure.
• To turn off the gas flame, turn the rotary switch
k
back
to the “0” position
• Close the main gas stop valve on the gas cooker.
Use oven gloves or potholders when handling hot pots,
pans or similar objects. You may be burned!
Never allow gas to escape without burning. Danger of
explosion!
After cooking, leave the glass cover
j
(page 173)
open until the burners stop giving off heat. Otherwise,
the glass cover could burst.
Never store easily flammable objects such as dishtowels,
serviettes, etc. near the cooker. Danger of fire!
Summary of Contents for Vantana 2018
Page 1: ...MANUAL Version 11 2017 Van Vantana GB...
Page 206: ...14 Technical Data 205 Index...
