manualshive.com logo in svg

HLF 2600 F, Service Manual

Share
Download
HLF 2600 F Service Manual Download Page 91

DISPOSAL 

 

 

S.M. HLF  2600/3600 F Eng V1-2011 

8-1 

HLF  Italian Design 

 

8 Disposal 

 
The following requirements must be observed in the case of disposal. 
 

 

WARNING

  

 
Persons who satisfy the necessary qualification and training requirements may only 
carry out disassembly and disposal of the equipment.  
 

 

NOTE  

 
Information on disposal organisations and collection points can be obtained from your 
local administrative authority. 
 
During disposal, it is necessary in any case to comply with the pertinent national and 
regional laws and directives. 
 
The machines do not contain any materials whose disposal requires special approval. 
 
 

•

  Disconnect equipment from power. 

 

•

  Remove any product raw materials, such as coffee beans, instant soluble 

powders and milk, from the equipment. 

 

•

  Empty coffee grounds container. 

 

•

  Empty water tank (if used). 

 

•

  Take the equipment apart. 

 

•

  Recycle individual parts according to material type. 

 

•

  Dispose of non-recyclable materials according to type. 

 
 

Summary of Contents for 2600 F



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands