HLF 2600 F Service Manual Download Page 38

Page: 38 / 154

CLEANING GUIDE

HLF Italian Design

4-4

S.M. HLF 2600/3600 F Eng V1-2011

•

Put An Empty Jug Under Drink Nozz:

The machine is asking for an empty jug

under the drink nozzle outlets. The jug has to be at least 1 Litre capacious.

•

Press P5 Button:

Once the jug has been placed, press P5 button to run the

coffee group final rinsing of the Entire Cleaning.

NOTE

The cleaning tablet needs 5 minutes to dissolve. If this time is not passed in the moment
the user tries to perform the coffee group final rinsing, the machine will show the time
left.

Entire Cleaning

Time Left: 1 min

When 5 minutes are run out, the machine will automatically start the coffee group final
rinsing.

Entire Cleaning

In Progress…

This means the machine is performing the coffee group final rinsing of the Entire
Cleaning.

Once the coffee group final rinsing is done, the message

Select a Drink

will back

appear on the LCD display.

Select a Drink

Summary of Contents for 2600 F



























































































































































Search results

Summary of Contents for 2600 F

Reviews:

Brands by name

Popular brands

HLF 2600 F, Service Manual

Search results

Summary of Contents for 2600 F

Reviews:

Brands by name

Popular brands