manualshive.com logo in svg

HLF 2600 F, Service Manual

Share
Download
HLF 2600 F Service Manual Download Page 28

INSTALLATION 

 
HLF  Italian Design 

3-10 

S.M. HLF  2600/3600 F Eng V1-2011 

At this point is important to watch the speed of the coffee coming out from the drink 
nozzle into the cup, wondering if it’s coming out too fast or too slow (almost dripping). 
 
If the speed of the coffee is fast and at the end of the brewing there is no brown coffee 
cream on top of cup, it means that the grinder blades are too open and they need to be 
closed. 
 
When the drink is finished the message 

Take Your Drink

 will appear on the LCD 

display. 
 

 
 
 

 

 

Take Your Drink 

The message 

Select a Drink

 will appear back again on the LCD display meaning that 

the HLF  2600/3600 coffee maker is ready for another drink. 
 
 

3.2.7.1 Closing the grinder blades 

 
Before to run a new drink, remove the right side panel as shown in the picture below. 
 

 

 
 
 
Slide the panel upwards [1] and take it off [2]. 
 
Move the blades adjuster to the “minus” direction of one “

click

” as shown on the picture 

below. 
 
 
 
 
 
 

Summary of Contents for 2600 F



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands