manualshive.com logo in svg

HLF 2600 F, Service Manual, Page: 10 / 154

Share
Download
HLF 2600 F Service Manual Download Page 10

DESCRIPTION 

 
HLF  Italian Design 

1-4 

S.M. HLF  2600/3600 F Eng V1-2011 

 

1.2 Introduction 

 

1.2.1  The HLF  2600/3600 coffee maker 

 
 
The HLF  2600/3600 coffee maker is a fully automatic coffee maker machine, which, in 
the basic version, can dispense pre-programmed coffee products through a height-
adjust-able product outlet into the container. The beverage required is selected via 
twelve beverage selection buttons. 
 
The HLF  2600/3600 coffee maker exhibits the latest marks of conformity, indicating that 
it satisfies the necessary certification standards.  
 

 

 

1.2.2  "Modem connectivity" optional  

 
A regular or cellular modem kit can be allocated on the back of the machine to allow the 
download or upload of the computer board settings at every time. 
 
 

1.2.3  "In tank filter" optional 

 
A resin filter can be installed inside the water tank to de-scale the water increasing the 
life of the hydraulic circuit. 
 
 

1.2.4 “Steam 

wand” 

optional 

 
A steam wand can be installed in the machine to have an additional point of steam. 
 
 

1.2.5  “Water Line connection kit” optional 

 
A kit can be applied to the machine to connect it directly to the water line avoiding the 
use of the water tank. 
 
 

1.2.6  “Coffee splitter” optional 

 
A coffee splitter can be added to the coffee machine, which will provide two coffees 
simultaneously. 
 

Summary of Contents for 2600 F



























































































































































Reviews:

No comments