HLF 2600 F Service Manual Download Page 36

Page: 36 / 154

CLEANING GUIDE

HLF Italian Design

4-2

S.M. HLF 2600/3600 F Eng V1-2011

4.2.2 Daily

Cleaning

Enter the CLEANING MENU (see par. 4.2.1) and press key n°2 to perform a Daily
Cleaning.

The machine will show the operations which have to be done, flashing some sentences
on the LCD display:

DAILY CLEANING

•

Put An Empty Jug Under Drink Nozz:

The machine is asking for an empty jug

under the drink nozzle outlets. The jug has to be at least 1 Litre capacious.

•

Press P5 Button:

Once the jug has been placed, press P5 button to run the

Daily Cleaning.

Daily Cleaning

In Progress…

This means the machine is performing the Daily Cleaning.

Once the Daily Cleaning is done, the message

Select a Drink

will back appear on the

LCD display.

Select a Drink

Summary of Contents for 2600 F



























































































































































Search results

Summary of Contents for 2600 F

Reviews:

Brands by name

Popular brands

HLF 2600 F, Service Manual

Search results

Summary of Contents for 2600 F

Reviews:

Brands by name

Popular brands