manualshive.com logo in svg

HLF 2600 F, Service Manual

Share
Download
HLF 2600 F Service Manual Download Page 84

OPERATING THE COMPUTER SOFTWARE 

 

 
This is the current password assigned by the factory. It can be changed using the drink 
buttons on the drink selection panel. The combination of the numbers from 5 to 9 can be 
used to create a new password. 
 
To set the password insert four digits and push button 3 to save the new password into 
the memory, and to quit the menu. 
 
 

 WARNING

 

 
Inside this function, any button can be used to create a new password, therefore is very 
easy to push a button by mistake and create accidentally a new password which is 
going to be requested the next time will be necessary to access the software. 
Unless is necessary to change the password, quit this menu by pushing the red button 
inside the front door, in order to prevent accidental mistakes. 
 
 

5.4.5  Set Factory Data 

 
This function is used to re-set the memory of the HLF 2600/3600 coffee maker to the 
original factory setting. Push button 1 or 2 till the message 

TECH PROGRAM Set 

Factory Data

 will appear on the LCD display. 

 

 
 
 
 

 

TECH PROGRAM 

Set Factory Data 

Pushing button 3 the message 

TECH PROGRAM Key 1 to Confirm

 will appear on the 

LCD display. 
 

 
 
 
 

TECH PROGRAM 

Key 1 to Confirm 

By pushing the drink button number 1 the memory of the HLF 2600/3600 coffee maker 
will be re-set to the factory setting. Any other button will quit the function. 
 

 WARNING

 

 

 
HLF  Italian Design 

5-30 S.M. HLF  2600/3600 F Eng V1-2011 

Summary of Contents for 2600 F



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands