manualshive.com logo in svg

HLF 2600 F, Service Manual, Page: 19 / 154

Share
Download
HLF 2600 F Service Manual Download Page 19

INSTALLATION 

 

 

S.M. HLF  2600/3600 F Eng V1-2011 

3-1 

HLF  Italian Design 

 

3 Installation 

 

3.1 Transport 

 
During the transport of the HLF  2600/3600 coffee maker is important to avoid the 
following operations: 
 

•

  Turning the box upside down or lay it down on its side 

•

  Dropping the box 

•

  Exposing it to rain, excessive cold or heat, or damp places 

 

Before transporting a used machine, the following instructions bust be followed 
 

•

  Switch off the machine and unplug the power cord 

•

  Empty the internal water tank 

 
If the machine has to be transported through an environment with temperatures below 
0°C: 
 

•

  Drain the water boiler and the steam boiler (if installed) completely.  

 

 CAUTION

 

 

 

DISCONNECT BOTH THE WATER BOILER AND THE STEAM BOILER HEATING 
ELEMENT!! During the next installation, keep the heating element disconnected. 
Run some cleaning cycles and be sure the boiler is full of water before 
connecting the heating element again. The same for the steam boiler. 

 

Summary of Contents for 2600 F



























































































































































Reviews:

No comments