manualshive.com logo in svg

HLF 2600 F, Service Manual

Share
Download
HLF 2600 F Service Manual Download Page 73

OPERATING THE COMPUTER SOFTWARE 

 

 

•

 

None

   

the button will act normally. 

 

•

 

Long

 

the drink will be dispensed always with the Long Drink pre-
selection. 

 

•

 

ExtraL 

the drink will be dispensed always with the Extralong Drink pre-
selection. 

 

•

 

Jug

 

the drink will be dispensed always with the Jug pre-selection. 

 
At this point the menu 

Drink 1

 is finished. Push button 5 to quit and go to the next 

menu. 
 

 

NOTE

  

 
All the drinks menu are the same from number 1 to number 12, which means that each 
drink button can be adjusted according with the operator necessity. From the factory the 
HLF 2600/3600 coffee maker comes with a setting inside the memory, which assigns a 
type of drink to each button, but this setting can be change at any time to please the 
requirements of the user. 
 

 

S.M. HLF  2600/3600 F Eng V1-2011 

5-19 

HLF  Italian Design 

Summary of Contents for 2600 F



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands