manualshive.com logo in svg

HLF 2600 F, Service Manual

Share
Download
HLF 2600 F Service Manual Download Page 44

CLEANING GUIDE 

 
HLF  Italian Design 

4-10 

S.M. HLF  2600/3600 F Eng V1-2011 

 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

 CAUTION

 

 

Use HLF cleaning tablet ONLY. Otherwise warranty will not be valid anymore. 

 

 

Entire Cleaning 

In Progress… 

 
 
 

 
This means the machine is performing the Entire Cleaning. 
 
When finished, the machine will show the next operations to do, to perform the rinsing of 
the milk pipe. 
 

•

 

Put An Empty Jug Under Drink Nozz:

 The machine is asking for an empty jug 

under the drink nozzle outlets. The jug has to be at least 1 Litre capacious. 

 

•

 

Put Milk Hose Into Fresh Water: 

Place the milk tube into a jug full of 1 Lt of 

Fresh water. 

 

•

 

Press P5 Button: 

Once the jug and the milk hose have been placed, press P5 

button to run the milk pipe final rinsing of the Entire Cleaning. 

 

 

Entire Cleaning 

In Progress… 

 
 
 

Summary of Contents for 2600 F



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands