manualshive.com logo in svg

HLF 2600 F, Service Manual

Share
Download
HLF 2600 F Service Manual Download Page 81

OPERATING THE COMPUTER SOFTWARE 

 

 
Push button 3, the message 

TECH PROGRAM Time Out W= XX s

 will appear on the 

LCD display. 
 

TECH PROGRAM 

Time Out W= XX s

 

 
 
 

 
This is the maximum time within which the clear tank of the water line kit (if installed) 
has to be filled. It can be changed by the user, depending on the pressure of the water 
line. More the pressure is high, more the filling is faster, so less time out has to be set. 
 
Push button 3, the message 

TECH PROGRAM Fresh Milk Ver= N 

will appear on the 

LCD display. 
 

TECH PROGRAM 

Fresh Milk Ver=N 

 
 
 

 
This function permits to turn the machine into fresh milk version or powder milk version. 
 
In powder milk version all the menu regarding the fresh milk (Steam Time, Froth, ecc) 
will be hidden, and also the cleaning routines will change (see Paragraph 4 “Cleaning 
Guide”) 
 
At this point the menu 

Settings

 is finished. Push button 5 to quit and go to the next 

menu. 
 
 

5.4.2 Money 

Value 

 
This menu is used to control a coin mechanism that can be attached on one side of the 
machine as an option, to accept coins or tokens, before dispensing a drink. 
 
 
Push button 1 or 2 till the message 

TECH PROGRAM Money Value

 will appear on the 

LCD display. 
 

 

TECH PROGRAM 

Money Value 

 
 
 

Push button 3 to gain into this menu and the message 

TECH PROGRAM D.Point   

10.00

 will appear on the LCD display. 

 

 

TECH PROGRAM 

D.Point   10.00 

 

 

S.M. HLF  2600/3600 F Eng V1-2011 

5-27 

HLF  Italian Design 

Summary of Contents for 2600 F



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands