manualshive.com logo in svg

HLF 2600 F, Service Manual

Share
Download
HLF 2600 F Service Manual Download Page 14

SAFETY INSTRUCTIONS 

 
HLF  Italian Design 

2-2 

S.M. HLF  2600/3600 F Eng V1-2011 

 

2.1.2  Where warning symbols are located 

 

 

NOTE  

 
• The equipment comes supplied with warning symbols (stickers) affixed wherever 
appropriate.  
 
• If any of the warning symbols should fall off during operation, the operator must stick 
these warning symbols back again immediately. 
 
 

2.1.3 Safety 

information 

in this Service Manual. 

 
In this Service Manual, you will find the following three levels of safety information: 
 

• Level 1 

 

 

 WARNING 

 

 
• A warning refers to significant hazards. Errors in follow the relevant safety instruction 
could lead to injuries or death.  
 
Depending on the type of danger, instead of STOP, one of the following symbols could 
be combined with the word 

WARNING

.  

 

 

WARNING

  

 
• Warning of electric shock.  
 

 

WARNING

  

 
• Warning of heat.  
 
 

Summary of Contents for 2600 F



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands