manualshive.com logo in svg

HLF 2600 F, Service Manual

Share
Download
HLF 2600 F Service Manual Download Page 22

INSTALLATION 

 
HLF  Italian Design 

3-4 

S.M. HLF  2600/3600 F Eng V1-2011 

 

WARNING

  

 

THE USE OF EXTENSION CORDS, ADAPTERS AND/OR MULTIPLE PLUGS IS 
STRONGLY FORBIDDEN ! 
 

 
 

3.2  Start up and operation mode 

 

3.2.1  Test the water hardness 

 
Before the installation of the machine, the first step is the testing of water.  
 
1- Take with a clean glass the water from the water line of the location where the 
machine has to be installed. 
 
2- Take a test strip from the bag, be careful to not touch the strip with fingers. 
 
3- Completely immerse test pad into the water glass for 1-2 seconds. 
 
4- Read immediately or within 15 seconds the result and compare it with the scale here 
below. 
 

 

 
 
 

Level  

6 

 means that the calcium into the water is very low instead the level  

1

  

indicates that the water is very hard. 
 
Following this scale is now important to set the machine, refers to paragraph 5.3.2 of 
this instructions manual to set the machine. 
 
 
 

Summary of Contents for 2600 F



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands