manualshive.com logo in svg

HLF 2600 F, Service Manual

Share
Download
HLF 2600 F Service Manual Download Page 109

TOTAL OVERVIEW 

 

Coffee Gear Motor Cam Adjustment 

 

 

S.M. HLF  2600/3600 F Eng V1-2011 

12-9 

HLF  Italian Design 

 

12.3  Coffee Gear Motor Cam Adjustment 

 

Preparation: 

 

•

  Remove the back panel. 

•

  Open the front door and insert the front door micro switch locker. 

•

  Remove the top lid. 

•

  Remove the right side panel. 

 

Adjustment:

 

 

Step Action 

 

1 

 
Turn off the machine and back on when “ Searching Coffee Group Position“ 
appears on the LCD display, the coffee group will start to run; pay attention to the 
little plastic tooth at the bottom. 
 
When it’s close to three o’clock position, turn off the machine. In this way, the plastic 
tooth will be stopped before the higher arrow ( named “ stand-by position ” ) which is 
the right position for the coffee group to get the coffee ground from the doser. 
 
Keep trying until the plastic tooth is almost in the position shown in the picture 
below. 

 

 

Summary of Contents for 2600 F



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands