manualshive.com logo in svg

HLF 2600 F, Service Manual

Share
Download
HLF 2600 F Service Manual Download Page 32

INSTALLATION 

 
HLF  Italian Design 

3-14 

S.M. HLF  2600/3600 F Eng V1-2011 

 
 
 
 

3.3.1  Getting a customized selection panel 

 
Once all the changes on each drink button and pre-selection button are done (refer to 
paragraph 5.3.3 and 5.3.4 – chapter 5), contact the Service and Support to get a new 
selection panel. 
 
It’s necessary to send a fax or an e-mail showing the names of the drinks desired on 
each button, to get back an e-mail containing a file to print out through a regular colour 
printer, having the new selection drink names on it. 
 
In case of trouble printing out the file received, contact the Service and Support to ask 
for a regular mail shipping. 
 
 

3.3.2  Installing the selection panel 

 
Lose the screw that hold the selection panel frame as shown in the picture below: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Take off the frame and insert from the lower side the selection panel as shown in the 
following picture. 
 

Summary of Contents for 2600 F



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands