1.4 Reverse Process to Change Auto Sipper to 6 Cell Turret
1 - 18
(3) Unplug the main unit connector from the connector on the Auto
Sipper. Then, dismount the Auto Sipper from the photometer
main unit. If unable to dismount, check if the guide screws are
fully loosened.
Fig. 1-31 Disconnecting Connection Cables from Photometer
Main Unit and Auto Sipper
NOTICE:
In handling the connector, absolutely do not touch the
connector contacts with bare hands. Touching with bare
hands invites poor contact, which is a cause of failure.
(4) Open the cable cover and secure the main unit connection
cables on the clamp. Then, close the cable cover.
Main unit connector in a state being
unplugged from the Auto Sipper
Main unit connection cables in
a state being secured
Fig. 1-32 Back of Sample Compartment
Main unit connector
Connector on Auto
Sipper
Main unit connection
cables
Clamp
Cable cover
Main unit connector
Clamp
Main unit connection
cables
