Hitachi HF-W6500, Instruction Manual

Page: 111 / 313

3. SETUP
3-2
● Windows® 10 setup procedure
Perform the following procedure to set up Windows® 10.
1. Turn on this equipment.
Windows starts running and setup is prepared.
Then, the message “Setup is installing devices. Please wait...” appears, indicating that
installation of the device driver is in progress.
• This processing may take several minutes. Please wait until it is completed.
• After the OS reboots, Setup goes on.
2. The Here's the legal stuff window opens.
• Check the contents, and then click the
Accept button.
3. The Get going fast window opens.
• Click
Customize .
• Select ON or OFF for settings as needed, and then click the
Next button.
4. The Create an account for this PC window opens.
• Type a user name in
Who's going to use this PC? .
• Type a password in
Enter password in Make it secure .
• Retype the password in
Re-enter password .
• Type a hint of password in
Password hint .
• Click the
Next button.
5. After the setup has been completed, the sign in operation is performed automatically.
< NOTE >
R arely you can not type Japanese when typing a password hint.
In this case, type Japanese by the following method.
• M
ove the input point to
Who’s going to use this PC
and check whether you
can type Japanese. If you can type Japanese, move the input point to
Password hint and check if you can type Japanese.
•
If you can not enter Japanese even if the above correspondence is done,
reset password after setup and enter hint of password.