6. RAS FEATURES IN HF-W100E/IoT
6-18
(2) Enabling the CODESYS runtime environment monitor
(a) Editing the config file
1. Follow the Steps 1 to 3 in “(a) Editing the config file” in “(1) Disabling the
CODESYS runtime environment monitor”.
2. The CoDeSysControl.cfg file opens. In the ComponentManager section, insert the
following line to add the WDT control component (CmpHWdtControl) as a
loading component.
Component.*=CmpHWdtControl
Note: The number added after “Component.” is an index and different depending
on the environment.
When you add CmpHWdtControl, add 1 to the index of the last component,
and use that value as the index for the CmpHWdtControl. (The lines that
start with “; (semicolon)” in the CoDeSysControl.cfg file are commented out
and therefore disabled.)
Figure 6-6 Editing the Config File (Enabling the Monitor)
3. Click the
File
menu, and on the menu, click
Save
.
4. Close the CoDeSysControl.cfg file.
