Hioki ST5680, Instruction Manual, Page: 91 / 253

91
Continuous Voltage Rise Test
Setting the number of tests
The number of tests is set.
In a BDV test, determine the dielectric breakdown strength or dielectric breakdown voltage from the
median of the result of the set number of tests.
1 1
1
Press [BASIC] > [TEST COUNT] on the setting
screen.
2 2
2
Change the value using [▲] or [▼] and then
press [ENTER] .
1 * 1 to 20
*1. Default setting
Setting the dielectric breakdown judgment reference value
The dielectric breakdown judgment method and reference value are set.
There are two judgment methods, judgment by the current upper-limit reference value and the arc
discharge detection.
(1) Setting the current upper-limit value
1 1
1
Press [BASIC] > [UPPER] on the setting screen.
2 2
2
Change the value using [▲] or [▼] and then
press [ENTER] .
0.010 mA *
2
to 100 mA
*2. Default setting
Dielectric Breakdown V
oltage (BDV) Measurement Mode
HIOKI ST5680A961-00