Hioki ST5680 Instruction Manual Download Page 222

Page: 222 / 253

222

Troubleshooting

Communications

Issue

Cause

Corrective action and reference page

Communications are

disabled.

(The

[REMOTE]

icon is not

displayed.)

Communications have not

been established.

Check that the connector connections are

correct.

Check that the interface settings are correct.

See “Communications (USB, LAN, RS-

232C, GP-IB)” (p. 183).

USB: Install the driver on the control device.

See “13.4 Connecting and Setting USB”

(p. 189).

RS-232C: Use a cross cable. Match the

baud rate of the instrument and that of the

control device.

See “Communications (USB, LAN, RS-

232C, GP-IB)” (p. 183).

USB, RS-232C: Check the COM port

number of the control device.

Communications are

disabled.

(The

[REMOTE]

icon is

displayed.)

The communication settings

are not correct.

If commands are not accepted, check the

control software delimiters.

GP-IB: Check the settings of the message

terminators. Check that the address settings

are correct.

See “Communications (USB, LAN, RS-

232C, GP-IB)” (p. 183).

A communication error

occurred.

A command error has

occurred (if commands are

not matched).

•Check the command spelling. Use

20H

for space characters.

•Do not add a question mark (

) to

commands that are not queries.

•RS-232C: Match the baud rate of the

instrument and that of the control device.

See Communication Command Instruction

Manual in the provided CD.

An execution error has

occurred.

If command strings are correct, but unable

to be implemented, try using modes that can

implement each command.

See Communication Command Instruction

Manual in the provided CD.

The send and receive

command details are not

correct.

Check the command send and receive

details using the communication monitoring

function.

HIOKI ST5680A961-00

Summary of Contents for ST5680






























































































































































































































































Search results

Summary of Contents for ST5680

Reviews:

Hioki ST5680, Instruction Manual, Page: 222 / 253

Search results

Summary of Contents for ST5680

Reviews: