manualshive.com logo in svg

Hioki ST5680, Instruction Manual, Page: 156 / 253

Share
Download
Hioki ST5680 Instruction Manual Download Page 156

156

 

 WARNING

 

„

Do not operate the external I/O mode switch (NPN/PNP) with the 

instrument turned on.

Otherwise, the devices connected to the external I/O terminal could be damaged.

 

„

Use specified wires. As an alternative way, use wires with a sufficient 

margin for the withstand voltage and current capacitance.

Otherwise, electric shock or short-circuit accidents could occur.

 

„

Turn off the instrument and the devices to be connected. After that, 

connect the devices to the external I/O terminal of the instrument.

Otherwise, electric shock accidents or instrument/device damage could occur.

 

„

When connecting a device to the external I/O terminal of the instrument, 

make sure that the input/output signals do not exceed the rating of the 

external I/O terminal.

Otherwise, electric shock accidents or instrument/device damage could occur.

 

„

When connecting a device to the external I/O terminal of the instrument, 

secure the connector using screws.

There is a danger of electric shock accidents if the connector comes off during 

operation and comes in contact with another conductive object.

 

„

Follow the procedure below before wiring the external I/O terminal.

1. Turn off the instrument and the devices to be connected.

2. Discharge static electricity from your body.

3. Check that the signal does not exceed the external input and output rating.

4. Properly isolate the instrument and the devices to be connected.

Failure to do so could cause the operator to experience an electric shock or damage 

the instrument.

HIOKI ST5680A961-00

Summary of Contents for ST5680






























































































































































































































































Reviews:

No comments