Hioki ST5680, Instruction Manual, Page: 216 / 253

216
Functional Specifications
-7. System settings
Interface settings
USB Terminator
Default setting CR + LF, CR, LF
CR + LF
LAN IP address
Subnet mask
Default gateway
Port
Terminator
Four three-digit numbers from 0 to 255
Default setting: 192.168.000.001
Four three-digit numbers from 0 to 255
Default setting: 255.255.255.000
Four three-digit numbers from 0 to 255
Default setting: off
1 to 65535
Default setting: 6866
CR + LF, CR, LF
Default setting: CR + LF
RS-232C When the Z3001 RS-232C interface is used
Communication
speed
Flow control
Terminator
9600 bps, 19200 bps, 38400 bps, 57600 bps
Default setting: 9600 bps
Off, Software
Default setting: off
CR + LF, CR, LF
Default setting: CR + LF
GP-IB When the Z3000 GP-IB interface is used
Addresses
Terminator
01 to 30
Default setting: 01
CR+LF, CR, LF
Default setting: LF
Instrument information Serial number
information
Version information
MAC address
Displays the manufacturing serial number.
Software version
FPGA version display
MAC address display
Self-check function Panel test
Panel calibration
Screen display test
ROM/RAM test
External I/O test The touch screen can be checked.
The touch screen position can be calibrated.
The display status and LED on/off status are checked.
The instrument built-in memory (ROM, RAM) is checked.
The external I/O input and output signals are checked.
Command monitor
function
Operations
Operation mode
Default setting
Displays the send and receive status of commands and
queries
Off, on
Off
HIOKI ST5680A961-00