Hino 600, Workshop Manual, Page: 69 / 451

CLUTCH MAIN UNIT (EATON 1401) CL02–22
INSPECTION AND REPAIR
EN02Z0202H300001
EATON SAS1401 and SOLO1401 Unit: mm {in.}
Inspection item Standard Limit Remedy Inspection procedure
Clutch facing thickness 11.43
{0.45}
8.26
{0.33}
Replace disc
assembly. Measure
Clutch disc misalignment 0-0.38
{0-0.0149}
0.38
{0.0149}
Replace. Measure
Oily facings, Loose rivets,
Broken or loose damper
springs — — Replace disc
assembly, if nec-
essary. Visual check
Clearance between clutch
disc hub and transmission
input shaft spline 0.05-0.15
{0.0020-0.0059}
0.5
{0.020}
Replace the
clutch disc or the
transmission
input shaft. Measure
Pressure plate misalign-
ment 0-0.102
{0-0.040}
0.76
{0.029}
Replace the
clutch cover
assembly Measure
Pressure plate friction sur-
face scoring or heat crack-
ing — — Replace the
clutch cover
assembly.
NOTICE
Regrinding of the
pressure plate is
not possible.
Visual check
Flywheel misalignment 0.05
{0.0020}
or less
1.0 {0.039} Replace. Measure
Clutch disk
Clearance
Input
Shaft