Hino 600, Workshop Manual, Page: 300 / 451

SERVICE BRAKE (FULL AIR BRAKE) BR02–22
(2) If the pedal play is out of the standard value, loosen the lock nut and
turn the push rod to adjust the pedal play to the standard value.
NOTICE
If you have loosened the push rod lock nut for the adjustment,
retighten it securely.
Tightening Torque:
17.5-32.5 N

m{179-332 kgf

cm, 12.9-24 lbf

ft}
8. ADJUST AND INSPECT THE STOP LIGHT SWITCH
(1) After installing bushing to the switch bracket, insert the stop light
switch then twist it clockwise while making contact with the tip of the
switch and the buffer, and fix it.
(2) After installing the switch, when releasing the brake pedal, make sure
there is no contact between the switch and buffer.
Confirm the operation of the switch surely.
(3) Check the clearance between stop light switch and buffer.
"D": 0.5-1.5 mm {0.0197-0.0590 in.}
SHTS068020200014
SHTS068020200015
SHTS068020200016