Hino 600, Workshop Manual, Page: 109 / 451

CLUTCH CONTROL CL03–9
INSPECTION AND REPAIR
EN02Z0203H300002
Inspection item Standard Limit Remedy Inspection procedure
Release bearing improper
rotation — — Replace release
bearing,
if necessary. Visual check
Release fork and release
hub:
Wear and damage — — Replace the
parts,
if necessary. Visual check
Release shaft bush:
Wear and damage Bush inner diameter
25.48-25.52 mm
(1.003-1.005 in.) — Replace the
bush,
if necessary.
After pressing in
a new bush, grind
inner diameter of
the bush to be fit-
ted to standard
specification. Visual check