Hino 600, Workshop Manual, Page: 342 / 451

SERVICE BRAKE (FULL AIR BRAKE) BR02–64
DESCRIPTION
EN0680202C100010
PUSH ROD LOCK NUT (1)
0.625"-18 thread
25-50 lb-ft (34-68 N
· m)
0.500"-20 thread
20-30 lb-ft (27-41 N
· m)
Add camshaft spacing
washers to provide no
more than 0.060" (1.52 mm)
end play.
CAM BRACKET MOUNTING (4)
0.500"-13 thread
Grade 8 = 90-120 lb-ft (122-163 N · m)
Grade 5 = 65-100 lb-ft (88-136 N · m)
0.625"-18 thread
Plain nut = 150-190 lb-ft (203-258 N · m)
Lock nut = 130-165 lb-ft (176-224 N · m)
AIR CHAMBER MOUNTING (2)
Bolt
Size
Torque
Add camshaft spacing
washers so that slack
adjuster is aligned
with air chamber clevis.
GREASE FITTING (1)
(some models)
1/8" dryseal
3-5 lb-ft (4-7 N · m)
BRAKE MOUNTING BOLTS
Grade 8 bolts with lock nuts and two
hardened washers on each bolt.
7/16"-20 60-75 lb-ft (81-102 N · m)
1/2"-20 85-115 lb-ft (115-156 N · m)
9/16"-18 130-165 lb-ft (176-224 N · m)
5/8"-18 180-230 lb-ft (244-312 N · m)
HOLD DOWN CLIP (2)
(some models)
0.250"-28 thread
105-135 lb-in (12-15 N · m)
DUST SHIELD
MOUNTING (4) or (6)
(some models)
0.312"-18 thread
12-20 lb-ft (16-27 N · m)
0.375"-16 thread
Grade 8 = 30-50 lb-ft (41-68 N · m)
Grade 5 = 25-35 lb-ft (34-47 N · m)
ANCHOR PIN
SET SCREW (2)
(some models)
0.375"-16 thread
10 lb-ft (14 N
· m)
minimum
ANCHOR PIN (2)
(T brake only)
0.750"-16 thread
185-350 lb-ft (250-474 N · m)
(15 X 4 Q brake only)
325-375 lb-ft (441-509 N · m)
SHTS068020200052
Grade 8 Nuts and Hard Flat Washers
Chamber Size 9 12 16 20 24 30 36 Spring Chamber
Bendix 20-30 lb-ft
(27-41 N

m)
30-45 lb-ft
(41-61 N

m)
45-65 lb-ft
(61-88 N

m)
65-85 lb-ft
(88-115 N

m)
Haldex 35-50 lb-ft (48-68 N

m) 70-100 lb-ft (95-136 N

m)
MGM 35-40 lb-ft (48-54 N

m) 133-155 lb-ft (180-210 N

m)
Anchorlok/Haldex 130-150 lb-ft (177-203 N

m)