Hino 600, Workshop Manual, Page: 107 / 451

CLUTCH CONTROL CL03–7
OVERHAUL
EN02Z0203H200001
IMPORTANT POINTS - DISMOUNTING
1. REMOVE THE PEDAL UNIT ASSEMBLY.
(1) Remove the 10 bolts and 2 nuts and dismount the pedal bracket
assembly from the vehicle.
NOTICE
Be careful not to damage the vehicle.
2. REMOVE THE CLUTCH PEDAL.
(1) Remove the clip, and tap the pedal shaft lightly to remove the clutch
pedal using a brass bar and a hammer.
IMPORTANT POINT - MOUNTING
1. INSTALL THE CLUTCH PEDAL.
(1) Apply lithium grease to the inner side and outer periphery of the bush-
ing, and install the bushing to the inserting hole on the shaft part of
the clutch pedal.
(2) Install the clutch pedal to the installing axle for pedal shaft and install
the pedal shaft to the pedal bracket using a plastic hammer.
2. INSTALL THE PEDAL UNIT ASSEMBLY.
SHTS02Z020300012
SHTS02Z020300013
SHTS02Z020300014