Hino 600, Workshop Manual, Page: 168 / 451

DIFFERENTIAL CARRIER (MERITOR RS17.19.21&23) DF02–8
SPECIAL TOOL
EN05Z0502K100001
Prior to starting a differential carrier overhaul, it is necessary to have these special tools.
1 PLATES 8' LONG X 3/4" THICK X 1-1/4" WIDE WITH
A TONGUE TO FIT SLOT IN BAR WELD PLATES TO
BAR 7 23-1/2" CENTER TO CENTER OF PIPE
2 HANDLE 7" LONG WITH SLOT IN ONE END TO FIT
CLAMP SCREW 8 CHAMFER END OF PIPE FOR WELDING
3 BAR 2" DIAMETER X 9" LONG WITH ONE END
SLOTTED TO FIT PLATE 9 4" DIAMETER PIPE
4 WELD ALL AROUND AFTER PRESSING PLUG IN
PIPE 10 PLUG 4" DIAMETER X 7" LONG WITH ONE END
TURNED 3" LONG TO FIT PIPE. DRILL 2" HOLE AND
MILL 3/16" WIDE SLOT 2" FROM TOP
5 WELD 11 SCREW 3-1/2" LONG X 5/8" DIAMETER WITH FLATS
ON END TO FIT HANDLE AND 2-1/2" LENGTH OF
THREAD ON OTHER END
6 SHAPE AND SIZE OF HOLES TO FIT CARRIER 12 DRILL 3/8" HOLE THROUGH HANDLE AND SCREW
2
1
4
3
6
5
8
7
10
9
12
11
SPX Kent-Moore
part number J-3409-D
SHTS05Z050200006