Hino 600, Workshop Manual, Page: 130 / 451

AUTOMATIC TRANSMISSION (ALLISON 3000RDS, 3500RDS) TR04–6
5. SCREW THE SPECIAL TOOL "GUIDE" BY HAND INTO THE
SPACER COUPLING OF THE TRANSMISSION ASSEMBLY.
ROTATE THE TORQUE CONVERTER SO THAT THE GUIDE
FACES DOWNWARD.
SST: Spacer coupling guide (S0965-71370)
6. ROTATE THE ENGINE TO ALIGN THE FITTING HOLE OF THE
ENGINE FLYWHEEL AND SPACER COUPLING WITH THE
INSPECTION HOLE ON THE FRONT OF THE FLYWHEEL HOUS-
ING.
NOTICE
First switch off the power so that the engine will not start.
7. MOVE THE TRANSMISSION JACK SLOWLY AND INSERT THE
GUIDE INTO THE FITTING HOLE OF THE FLYWHEEL.
! WARNING
Do not lower the front side of the transmission. If lowered, the torque
converter may slide out of the transmission and you can be injured.
8. MOVE THE TRANSMISSION JACK SLOWLY AND ADJUST BY
BRINGING THE FITTING FACES OF THE TORQUE CONVERTER
HOUSING AND THE FLYWHEEL HOUSING.
9. TIGHTEN THE BOLTS TO JOIN THE TORQUE CONVERTER
HOUSING AND THE FLYWHEEL HOUSING.
Tightening Torque:
37-57 N

m {439-520 kgf

cm, 32-38 lbf

ft}
10. LOWER AND REMOVE THE TRANSMISSION JACK.
11. TAKE THE GUIDE OUT OF THE INSPECTION HOLE ON THE FLY-
WHEEL HOUSING FRONT WITH A SCREW DRIVER.
SHTS03Z030400016
SHTS03Z030400017
SHTS03Z030400018