![background image](http://html1.mh-extra.com/html/hilti/jaibot/jaibot_manual_2136282035.webp)
*2230834*
2230834
English
27
▶
Keep bystanders a safe distance outside the safety zone. Everyone entering the safety zone must
wear personal protective equipment.
Fragments of the workpiece or of a broken accessory tool may
fly off and cause injury beyond the immediate area of operation.
Electrical safety
▶
The plug on the supply cord of the electric tool must match the power outlet. Do not change the
plug in any way. Do not use adapter plugs with earthed (grounded) electric tools.
Unmodified plugs
and matching outlets reduce risk of electric shock.
▶
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, cookers, stoves
and refrigerators.
There is an increased risk of electric shock if your body is grounded.
▶
Do not expose the power tool to rain or wet conditions.
Water entering a power tool will increase the
risk of electric shock.
▶
Do not abuse the supply cord. Never use the supply cord for carrying, pulling or unplugging
the power tool. Keep the supply cord well away from heat, oil, sharp edges and moving parts.
Damaged or tangled supply cords increase the risk of electric shock.
▶
When operating a power tool outdoors, use only extension cords of a type suitable for outdoor
use.
Use of an extension cord suitable for outdoor use reduces the risk of electric shock.
▶
If use of the power tool in a damp environment cannot be avoided, use a ground fault circuit
interrupter.
Use of a ground fault circuit interrupter reduces the risk of electric shock.
▶
Dirty or dusty power tools that have been used frequently for work on conductive materials should
be checked at regular intervals at a Hilti Service Center.
Dust (especially dust from conductive
materials) or dampness adhering to the surface of the power tool may, under unfavorable conditions,
lead to electric shock.
Personal safety
▶
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not
use a power tool while you are tired or under the influence of drugs, alcohol or medication.
▶
Wear your personal protective equipment and always wear protective glasses.
Depending on the
type of tool you are using and its purpose, wearing safety equipment such as a dust mask, slip-resistant
safety shoes, a hard hat or hearing protection will reduce the risk of injury.
▶
Remove accessory tools or wrenches before switching the power tool on.
An accessory tool or a
wrench left attached to a rotating part of the power tool can cause injuries.
▶
Adopt the correct posture when working. Maintain proper footing and balance at all times.
This
will give you better control of the product in unexpected situations.
▶
Wear suitable work clothes. Do not wear jewelry or loose clothing. Keep your hair, clothing and
gloves away from moving parts.
Loose clothes, jewelry or long hair can be snagged by moving parts.
▶
Tampering with or modification of the equipment is not permitted.
▶
The power tool is not intended for use by inexperienced persons who have received no special
training.
▶
Keep the power tool out of reach of children.
▶
When working with the equipment powered off an external source, always guide the supply cord
and the extension cable to the rear and away from the equipment.
This reduces the risk of tripping
over cables while work is in progress.
▶
If they can be connected, dust extraction and collection systems must be connected and used correctly.
▶
Do not lull yourself into a false sense of security and do not flout the safety rules for power tools, even if
you are familiar with the power tool after using it many times.
Power tool use and care
▶
Do not overload the power tool. Use the correct power tool for the job.
▶
Do not use a power tool if it has a faulty on/off switch.
A power tool that can no longer be switched
on or off is dangerous and must be repaired.
▶
Take good care of the power tool. Check that moving parts operate satisfactorily and do not jam,
and make sure that no parts are broken or damaged in such a way that the power tool might no
longer function correctly. Have damaged parts repaired before using the tool.
Many accidents are
caused by poorly maintained power tools.
▶
Use power tools, accessories, insert tools, etc. in accordance with these instructions. Take the
working conditions and the work to be performed into account.
Use of power tools for applications
other than those intended can result in hazardous situations. Take the working conditions and the work
to be performed into account.
▶
Keep grips and gripping surfaces dry, clean and free from oil and grease.
Slippery grips and gripping
surfaces do not allow the power tool to be safely operated and controlled in unforeseen situations.
Summary of Contents for Jaibot
