![background image](http://html1.mh-extra.com/html/hilti/jaibot/jaibot_manual_2136282036.webp)
28
English
2230834
*2230834*
▶
Check that accessory tools are compatible with the machine’s chuck/drive system and that they
are installed and secured correctly.
▶
Avoid applying an excessive amount of grease to the drill bit connection end.
Grease may otherwise
be forced out of the chuck when the power tool is in operation.
Service
Have the power tool repaired only by a qualified specialist using only genuine Hilti spare parts.
Personal protective equipment
▶
Wear your personal protective equipment and always wear a hard hat, protective goggles, ear
defenders, safety footwear and protective gloves.
Additional safety instructions
▶
Make sure that the floor can support the weight of the Jaibot.
▶
Do not use the Jaibot for as a tractor for towing.
▶
Do not climb on to the Jaibot and do not use it as a transporter.
▶
Do not attempt to lift anything with the robot arm.
▶
Do not stand directly underneath the robot arm.
▶
While the equipment is in operation, always maintain the specified safe distance of 2 m / 6 feet clear in
all directions. This also applies to all other persons in the vicinity of the Jaibot.
▶
Make sure that the Jaibot is stable before you switch it to work mode.
▶
Be aware of what is happening in your surroundings at all times when operating the equipment and make
sure that the route ahead is clear and safe.
▶
It is possible to move the Jaibot on rough and sloping surfaces. If the slope is more than 5 ° the mast
has to be retracted and the slowest speed selected. The operator is responsible for safety.
▶
Do not attempt movement on slippery surfaces.
▶
Always contact obstacles with both caterpillar tracks at the same time.
▶
Do not steer the Jaibot toward yourself.
▶
Do not attempt to climb or descend steps or drive over ledges higher than 15 cm / 6 inches.
▶
During operation of the Jaibot and also during transport, all the doors of the Jaibot must remain closed.
▶
Keep the wireless remote control with you at all times. If anything unexpected occurs, press the
emergency stop button to stop all functions.
▶
The Jaibot can be operated only with the TE 6-A22 hammer drill. The TE 6-A22 must be securely installed
in the holder and all threaded fasteners must be firmly tightened.
2.2
Safety
WARNING
Danger through improper use!
Risk of damaging the battery.
▶
Treat batteries with care in order off prevent damage or leakages which can severely damage your health!
Observe the following safety precautions for the safe handling and use of Li-ion power tools batteries.
Failure to follow can result in skin irritation, severe corrosive injury, chemical burns, fire, or explosion.
▶
Batteries must not be modified or tampered with!
▶
Never use recycled or repaired batteries conducted by non-
Hilti
companies.
▶
Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. Examine your batteries regularly for signs of damage, such as shredding, cuts
or punctures.
▶
Never use the battery or a battery-operated power tool as a hammer.
▶
Avoid eye or skin contact with leaking liquids!
➥ See
(What to do in case of damaged batteries)
.
▶
Damaged batteries can leak fluid which may moisten adjacent objects. Clean these objects with warm
soapy water and replace the damaged batteries.
➥ See
(What to do in case of damaged batteries)
.
▶
Never expose batteries to elevated temperature, sparking, or an open flame because the battery may
explode.
▶
Do not touch the battery poles with your fingers, tools, jewelry, or other metallic objects because this
may cause a short circuit, electrical shock, burns or explosions.
▶
Keep batteries away from rain or moisture. Penetrating moisture can cause short circuits, electrical
shock, burns or explosions.
Summary of Contents for Jaibot
