![background image](http://html1.mh-extra.com/html/hilti/jaibot/jaibot_manual_2136282053.webp)
*2230834*
2230834
English
45
Trouble or fault
Possible cause
Action to be taken
Jaibot stops.
Battery voltage of the wireless re-
mote control too low.
▶
Change the battery.
Some other electronic device is
interfering with the wireless link
between wireless remote control
and Jaibot.
▶
Switch off other electronic
devices in the vicinity or remove
them.
The wireless remote control is out
of range of the Jaibot.
▶
Move the wireless remote
control closer to the Jaibot.
The angle of inclination is too
steep.
▶
Fully retract the telescopic mast
and try moving the Jaibot again.
The batteries have discharged.
▶
Connect the Jaibot to the
electricity supply to recharge its
batteries.
Tracks slip.
The track cleats are worn.
▶
Have the tracks replaced.
Contact
Hilti
service.
10.2
Troubleshooting (wireless remote control)
If a malfunction occurs, immediately switch off the wireless remote control.
Trouble or fault
Possible cause
Action to be taken
The Jaibot does not recog-
nize the commands from the
wireless remote control.
There is a shielding object between
wireless remote control and Jaibot.
▶
Remove the shielding object
or move the wireless remote
control to another location
within range.
Fault affecting the Jaibot.
▶
Check whether the Jaibot is in
working order. Contact
Hilti
service.
The batteries have discharged.
▶
Connect the Jaibot to the
electricity supply to recharge its
batteries.
The batteries have discharged.
▶
Change the battery in the
wireless remote control.
Red LED flashes for approx.
3 minutes. Every flash is ac-
companied by an acoustic
signal. Green LED flashes.
Battery voltage of the wireless re-
mote control too low.
▶
Change the battery.
The wireless remote control was in
uninterrupted use for more than 8
hours.
▶
Restart the wireless remote
control.
During operation:
Red LED
long-flashes once. Every flash
is accompanied by an acous-
tic signal. Green LED is off.
The wireless remote control has
developed a serious fault.
▶
Contact
Hiliti
Service.
During start-up:
Red LED
long-flashes three times. Ev-
ery flash is accompanied by
an acoustic signal. Green
LED is off. After the signal,
the wireless remote control
switches itself off.
Battery voltage of the wireless re-
mote control too low.
▶
Change the battery.
At least 1 switch that triggers a
safety signal has been activated.
▶
Return all switches to their
neutral positions.
The emergency stop button was
pressed.
▶
Reset the emergency stop
button and press the start
button to re-establish the
connection to the wireless
remote control.
Summary of Contents for Jaibot
