![background image](http://html1.mh-extra.com/html/hilti/jaibot/jaibot_manual_2136282050.webp)
42
English
2230834
*2230834*
2. Grip the other end of the battery and pull it out of the housing.
7.3
Operation, charger, wireless remote control
7.3.1 Inserting the battery
1. Apply light pressure to push the battery against the contacts in the charger.
2. Push the battery up.
The battery must slide easily into the correct position. If resistance is perceptible, check whether
the battery has been inserted wrong way round.
Charging begins automatically.
7.3.2 Removing the battery
1. Apply light pressure to push the battery against the contacts in the charger.
2. Pull the battery down.
The battery is fully charged as soon as the yellow LED goes out.
For safety reasons, the battery should, however, be removed from the charger after completion of
charging.
8
Care and maintenance
8.1
Care and maintenance
WARNING
Electric shock hazard!
Attempting care and maintenance with the supply cord connected to a power outlet
can lead to severe injury and burns.
▶
Always unplug the supply cord before carrying out care and maintenance tasks.
Care
• Carefully remove any dirt that may be adhering to parts.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these may attack the plastic parts.
Maintenance
WARNING
Danger of electric shock!
Improper repairs to electrical components may lead to serious injuries including
burns.
▶
Repairs to the electrical section of the tool or appliance may be carried out only by trained electrical
specialists.
• Check all visible parts and controls for signs of damage at regular intervals and make sure that they all
function correctly.
• Do not operate the product if signs of damage are found or if parts malfunction. Have it repaired
immediately by
Hilti
Service.
• After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local
Hilti Store
or online at:
www.hilti.group
.
8.2
Cleaning the marker system
1. Set the rocker switch on the wireless remote control to the position for working / drilling.
2. Open the door of the service compartment.
3. To clean the marker system, open the "Service" menu on the tablet and select the "Service marker
system" operation.
➥ The robot arm moves to the appropriate service position.
4. Close the main valve.
Summary of Contents for Jaibot
