Magcoding Monster Fast Guide
Set
Robot
Coding Card
Play Sheet
Block
USB Dongle
Accessories
battery
MMZS1
1
48
X
X
X
MMZSA-M1
MMZS1-A2
1
48
48
1
1
1
1
Magnetic 50pcs
Plastic 60pcs
X
AA and USB
Charging
AA and USB
Charging
AA and USB
Charging
Glasses
Arm x 2
Glasses
Arm x 2
Glasses
Arm x 2
Modes to Control
Magcoding Monster has basic two ways of control.
1.
Unplugged by paper card, hand motions.
The paper card mode offers various kinds of coding ways
such as Do, Re, Mi Fa, Sol, Ra, Ti, Do – Music composing,
direction mode, numbers, change the color of robot’s face, sound card.
Moreover, Gesture following, Gesture coding, Line tracing, hand-direction and
avoidance mode are also offered.
2.
Plugged by Scratch 2.0 and Mobile App.
By Mobile App, voice activation is also possible and detailed
coding is available such as distance & movement angle adjustment for
the robot ( 1cm forward and backward and 1 degree angle is adjustable by the App,
which is the world first applied function on the coding robot.)
OFF
OFF there is a OFF mode on the bottom of the robot to turn off or on.
CODING
CODING Download the monster-only application to control the device
Search and download Magcodinding APP from the Apple App Store or Google Play Store.
CODE
CODE Control the off-line coding by using the paper coding card
What is Magcoding Monster?
It is the coding robot with plugged and unplugged function at the same time.
By plugged, the scratch programming is possible, gyro driving, voice activation,
basic coding and music composing by paper card, motion activation, gesture following,
avoiding the obstacle, etc. All exciting variety of functions are possible with Magcodingz.
It has monstrous functions. So it is called Monster!
And most importantly, Magcoding is compatible with magnetic and plastic block at the same time!
Before we find out the various function of Magcoding,
let’s get to know basic information of Magcoding Monster.
BATTERY INFORMATION
Installing or Replacing Batteries
WARNING To avoid battery leakage, please take a
not the instructions carefully. Failure to follow these instructions
can result in battery acid leakage that may cause burns,
personal injury, and property damage.
REQUIRED: 3pcs x 1.5V AA batteries for the robot. One of the Monster model has
USB charging battery instead of AA battery model.
Battery must be installed or replaced by an adult
Monster requires 3(Three) pcs of AA batteries.
The battery compartment is located on the back of the robot.
To install battery, first undo the screw and if there is no screw,
just unclick the part to open the compartment. Screw does not need all the
time as there is clicked. Install batteries as indicated inside the compartment.
Put the compartment door back with click or screw the compartment back in.
BATTERY CARE AND MAINTENANCE TIPS.
Use three AA batteries.
Be sure to insert batteries correctly (with adult supervision) and always
follow the toy and battery manufacturer’s instructions.
Do not mix normal batteries with rechargeable batteries.
Do not mix new and used batteries.
Insert battery with correct polarity. (+) and (_) ends must be inserted in
the correct directions as indicated inside the compartment.
Do not recharge non-rechargeable batteries.
Only charge rechargeable batteries from the robot before charging.
Only use batteries of the same or equivalent type.
Do not short-circuit the supply terminals.
Remove weak or dead batteries from the product all the time.
Remove batteries of product will be not in use for an extended period of time.
Store at room temperature.
To clean, wipe the surface of the unit with dry cloth.
OFF
CODE
LINE MODE
Read the QR code with your smartphone
Go to the Magcoding Monster homepage
Line sensor
Motion Activation
Distance Sensor
LED Face
Card REcognition Sensor
LED
Reset Button
Start Magcoding Monster!
Magcoding Monster has 4 different set that a customer can make a choice from
at their own usage.
It comes in the box. Open the box and take out the robot.
In order to Magcoding Monster ready for use, you need to
complete the following steps below;
1.
Open the battery compartment at the backside of the robot.
There are two ways of the charging method, which are
1) AA batteries, 2) USB charging lithium battery. Both method
cannot be used at the same time but you can choose.
2.
Insert 3pcs of AA batteries. Please refer to the picture for ensuring
the correct way of inserting the batteries.
For USB charging Lithium battery, please also refer to the picture to
make sure to be inserted correctly.
3.
Make sure to reclose the battery case by clipping the cover back on.
Note: Battery must be fully charged or use new AA battery.
4.
Turn Magcoding Monster on: On the bottom of the robot, slide the power
switch to the mode that you would like to do such as OFF,
CODE(Plugged Code: smart devices), CARD(Paper Card Coding Mode).
When the robot is turned on, the robot fresh 6 different LED lights on the face,
body, and on top device. For the usage of Smart Device, put the switch to CODE.
C
M
Y
CM
MY
CY
CMY
K
